Reference photo: a spirit level on timber. Before any new floor goes down, check how flat and level the surface underneath really is.
Flooring is a related capability alongside my main work, which is kitchen renovation in Malvern. In a kitchen, the floor affects cabinet heights, appliance clearances and how the room meets the rest of the house. So I check level and subfloor condition before discussing finishes.
These checks are part of the on-site assessment. The findings decide whether the floor needs preparation before anything new is laid.
01Level and flatness
How far the floor runs out across the room, and whether there are dips or humps where base cabinets and the dishwasher will sit. Small variations can be taken up with cabinet legs. Larger ones may need levelling first.
02Subfloor condition
Movement, soft spots or loose boards in timber floors, and cracks or old adhesive on slabs. A new finish laid over an unsound base often shows the same problem again later.
03Moisture
Signs of past leaks around the sink, dishwasher and fridge connections, where damage is often hidden under the existing floor covering.
04Heights and transitions
Where the kitchen floor meets hallways or living areas, door clearances, and how the finished floor height affects the gap under the benchtop for appliances.
There’s no single right answer. It depends on the flooring material, the cabinetry and how you might use the room later.
Laying the floor through first means the whole room is finished, and a later change to the cabinet layout doesn’t leave a gap in the floor. With floating floors, though, heavy cabinetry and benchtops usually shouldn’t pin the boards down, and the manufacturer’s installation instructions need to be followed.
Installing cabinets first and running the floor up to the kickboards can save material and suit some floating products. The downside is that the layout is more or less fixed to the existing footprint.
Whichever way it goes, finished floor heights have to be set before the benchtop height and appliance openings are confirmed. I set out the sequence in the written quotation so you can see how the work is ordered.
Reference photo: a kitchen mid-renovation with the floor still unfinished. What to look at: where the floor meets the appliances and walls, which is where heights and transitions get decided.
A kitchen floor deals with water, dropped items and a lot of foot traffic. Which material suits depends on the subfloor, the rest of the house and how you use the room. These are the practical options I usually talk through.
Tiles
Hard-wearing and easy to wipe down. They need a stable, flat substrate because movement underneath can crack tiles or grout. See Tiling and Kitchen Splashbacks.
Vinyl and hybrid planks
Comfortable underfoot and can handle spills, depending on the product. Thin products show unevenness underneath, so surface preparation matters.
Laminate
Can suit a kitchen that flows into living areas. Water resistance at the edges and joints varies a lot between products, which matters near the sink and dishwasher.
Existing timber floors
Sometimes worth keeping and running through. Their condition and any old water damage near the wet areas decide whether that’s practical.
If your floor already feels uneven, read Uneven Floors and a New Kitchen first. Hidden moisture and substrate issues are covered in Surface Preparation and Hidden Conditions.
If flooring work involves moving the dishwasher or sink connections, or adding underfloor heating, those parts are done by appropriately authorised specialists. See Licensed Trades for Plumbing and Electrical. An inspection can’t reveal everything under an existing floor covering, so the scope can change once the old floor is lifted.
If you’re planning a kitchen in Malvern and want the floor considered as part of it, send an enquiry through the contact page, and I’ll come and look at what’s there.