Home / Kitchen Renovation Guides / Uneven Floors

Field note — Floor level

Check the floor before the new cabinets go in.

An uneven kitchen floor often goes unnoticed until new cabinetry, a long benchtop or a run of tiles has to sit on it. I’m Ivan Bodnar, an independent home renovation specialist. When I assess a kitchen renovation in Malvern, floor level is one of the things I check on site. It affects how the cabinets are set out, which flooring suits the room and what goes into the written quotation.

Written by Ivan Bodnar, Independent Home Renovation Specialist

Field 01 — Why level matters

Small falls add up over a long run of cabinets

Base cabinets are set level on adjustable legs, so a modest fall can often be taken up during installation. Along a longer run, though, the fall turns into a height difference at one end. You see it in kick boards that taper, benchtops that need packing, and doors and drawers that don’t line up.

Rigid finishes are less forgiving. Tiles and many floating floors need a flat, sound base. Laid over a dip or a hump, they can develop hollow spots, cracked grout or joints that open up. That’s why surface preparation starts at floor level.

Field 02 — Checking the floor

Five things I check at floor level

On the on-site assessment I check the floor as part of the kitchen as a whole, not on its own. If you’ve noticed a door that sticks or a spot that feels soft, point it out when we meet.

01Level across the room and along the line where the cabinets will sit.

02Flatness: dips and humps under a straight edge, not just the overall fall.

03Movement: boards that flex, squeak or feel soft underfoot.

04Moisture: staining, swelling or lifting near the sink, dishwasher and fridge.

05Existing layers: how many coverings are already down, and what lies underneath them.

A partially renovated kitchen with an exposed brick wall, freestanding range cooker, extractor hood, refrigerator, construction materials and unfinished flooring.

Reference photo: a kitchen mid-renovation with the flooring unfinished. Once the floor coverings come up, you can see what’s underneath.

Field 03 — Levelling and subfloor options

The fix depends on what's causing the problem

Minor fall, sound floor: often handled by adjusting cabinet legs and packing during installation.

Dips or humps under new finishes: a levelling compound over a suitable, prepared substrate before tiles or new flooring go down.

Damaged or uneven timber subfloor: replacing or adding sheeting where the existing boards aren’t a suitable base.

Moisture damage: the cause has to be found and dealt with first. Plumbing repairs are carried out by appropriately authorised specialists. See licensed trades.

Structural concerns: problems in the framing under the floor may need advice from a suitable specialist. Structural engineering is outside my work.

It also matters whether the new flooring runs under the cabinets or stops at the plinth. That choice changes the order of work and how much levelling is needed.

Field 04 — Cabinets and the quotation

Floor condition belongs in the written quotation

After the free on-site assessment, I prepare a written quotation. It sets out the floor preparation I expect the kitchen to need, alongside the cabinetry, surfaces and finishes. Some conditions only show once the old cabinets and floor coverings are lifted, because an inspection cannot reveal every concealed issue. If something turns up that changes the scope, I’ll explain what it means and talk you through the practical options.