Home / Kitchen Renovation Guides / Benchtops & Cabinets

Field notes — Benchtops & cabinets

Worn benchtops and cabinets: repair, reuse or replace

A chipped laminate edge or a door that won’t sit straight is usually what people notice first. That’s often a sign of something else. Whether a part can be repaired or reused depends on the carcass, the substrate and what moisture has been doing behind the finish. Here’s how I look at each of those during a kitchen renovation in Malvern.

Written by Ivan Bodnar, Independent Home Renovation Specialist

Modern white kitchen cabinetry with wide wood-effect drawers, including an open drawer being handled by a person.

Reference photo: wide drawers being opened in a modern kitchen. A drawer is only as good as what carries it. When one drops, sticks or grinds, check the runners first, then the side panels they’re screwed into. A new front won’t fix a runner that has lost its fixing.

Field 01 — Condition

Four signs of wear, and what each one tends to mean

These are what I check first when I open a worn kitchen. Each one can be minor or serious. The difference is usually what you find when you take the part off.

01Worn laminate edges

A lifting or chipped edge strip near the sink or cooktop often means water or heat has got under it. If the board underneath is still firm and dry, the benchtop can sometimes be repaired or kept for a while. If it has swollen or crumbles when pressed, re-gluing the edge won’t last.

02Swollen carcasses

Swollen particleboard at the base of a cabinet, especially under the sink or by the dishwasher, doesn’t go back to its original shape. It affects how the doors hang and how the benchtop is supported. Usually that cabinet needs replacing, even if its neighbours can stay.

03Sagging doors

Sometimes a door just needs its hinges adjusting. If it drops again soon after, the hinge screws may be pulling out of soft board, or the carcass itself may be out of square. Those are different problems with different fixes.

04Failing hinges and runners

Worn hinges and drawer runners can often be replaced without touching the rest of the cabinet, provided the panels still hold a fixing. This is one of the more practical repairs in an otherwise sound kitchen.

Field 02

Three ways forward

Once the condition is clear, most worn kitchens fall into one of these. The inspection decides which.

Option A

Repair

This makes sense when the structure is sound and the wear is on the surface or in the hardware: hinges, runners, an adjustable door or a small edge repair. It costs the least, but it won’t change how the kitchen works.

Option B

Partly reuse

Keep the carcasses that are dry, square and firm. Replace the damaged ones, and fit new doors, a new benchtop or both. This works best when the existing layout still suits the way you use the kitchen.

Option C

Replace

This is the honest option when swelling, moisture or soft board runs through most of the cabinetry, or when the layout itself is the problem. New doors on failing carcasses usually just put off the same job.

A neglected kitchen with wooden cabinetry, a tiled counter, an old sink, a damaged window, open cupboards, dirt, and debris.
Field 03 — Underneath

The cabinet only tells half the story

Replacing visible finishes before checking moisture, substrate suitability, service access and underlying damage can cause avoidable rework. Under the sink I look at the carcass base, the wall behind it and the floor line. That’s where a slow leak usually shows first.

An inspection can’t reveal every concealed issue. Some things only show once cabinets come out, which is why what may be found behind kitchen cabinets is worth reading before you settle on a scope. If the fix involves pipes or power points, that part is done by appropriately authorised licensed trades, not by me.

Field 04 — Self-check

Five things you can check before the assessment

None of these needs tools. Your notes will make the on-site assessment more useful.

□ Press the base panel under the sink. Does it feel firm, or soft and swollen?

□ Run a hand along the benchtop edges near the sink, cooktop and dishwasher. Are any lifting or rough?

□ Close every door. Which ones sit unevenly, and do they drop again after you adjust them?

□ Open each drawer fully. Note the ones that stick, drop or grind.

□ Ask whether the layout still works. If storage or bench space is the real complaint, see more storage and bench space without starting over.

Decide from the condition, not the finish

Whether you’re updating for yourself or before a sale or rental, the right mix of repair, reuse and replacement depends on what the inspection shows. After I’ve looked at the kitchen, I prepare a free written quotation that sets out which parts stay and which are replaced. For floors that may affect new cabinetry, see uneven floors and a new kitchen.