Home / Services / Interior and Exterior Painting

Chapter 10 — Painting

Paint is the last coat. What it goes on decides how long it lasts.

Painting is a related capability alongside my main work, kitchen renovation in Malvern. Once the cabinets are in and the splashback is finished, the kitchen walls, ceiling and trim usually need painting. I’m Ivan Bodnar, an independent home renovation specialist. I look at the condition of each surface and how the room is used before I suggest a paint system.

Bright kitchen undergoing renovation, with white cabinetry, a new rangehood and surrounding surfaces covered in protective plastic and brown paper; a step ladder is visible in the foreground.

Reference photo: new cabinetry and benches covered in plastic and paper, with a ladder ready. Protect the finished work before any paint is opened.

Field 10.1 — Preparation

Four checks before the first coat

Most paint problems in a kitchen start underneath the paint. Flaking, stains bleeding through and patches that show in side light usually come back to surface preparation rather than the paint itself.

01Moisture. Walls near the sink, window and cooktop are checked for damp or past water damage. Painting over moisture only hides it for a while.

02Grease and residue. Kitchen surfaces collect cooking residue that stops new paint bonding properly. They need cleaning before anything else.

03Repairs. Cracks, dents, old fixing holes and patches where cabinets or a splashback came off are filled and sanded. Larger plaster damage is a plastering job first.

04Existing coatings. The current paint has to be sound and compatible with what goes over it. If an older surface may contain hazardous material, it’s assessed by an appropriate specialist before any sanding.

Open-plan kitchen with warm wood cabinetry, dark accents, integrated appliances, under-cabinet lighting and an adjoining living area.

Reference image: once cabinets are in, check cut-ins, patched walls and ceiling lines around them.

Field 10.2 — After the renovation

Walls and ceilings once the kitchen is in

A kitchen renovation leaves marks. Old cabinet outlines, new plaster around relocated power points, cut edges along a new splashback and scuffs from installation all show up once the room is lit. Painting at the end ties these surfaces together.

I plan the painting into the overall order of work, so new benchtops, cabinetry and appliances are protected first. Ceilings above a cooktop usually need extra cleaning and a primer that seals stains, because grease and old marks can come through a standard coat. Where new and old plaster meet, a primer helps the finish look the same across the whole wall.

Field 10.3 — Paint systems

Kitchens deal with steam, heat and daily wiping. The paint system has to cope with that.

Which sheen suits a kitchen?
A finish you can wipe down is usually more practical on kitchen walls than a flat one, which marks easily. Ceilings and living areas next to the kitchen can be handled differently.

Do I need a primer?
New plaster, repaired patches, stained areas and changes between paint types usually do. The primer is chosen for the surface it goes on.

What about doors, frames and trim?
Timber trim gets knocked and handled, so it needs a harder-wearing coat than the walls. Painted cabinet doors are their own question, covered in repair, reuse or replace.

Field 10.4 — Exterior

Exterior painting follows the same rule

Outside, the surface is exposed to sun, rain and movement, so preparation matters even more. Loose or failing coatings, weathered timber and gaps around frames are dealt with before painting, and the products are chosen for exterior use. Weather can affect when outside work can go ahead.

The right scope depends on what the on-site assessment shows. An inspection can’t reveal every concealed issue, such as moisture behind a painted surface, so this is discussed openly before a written quotation is prepared.