Home / Kitchen Renovation Guides / Storage & Bench Space

Field notes — Storage & bench space

More storage and bench space without starting over

“We need more storage” is one of the most common things homeowners say about an existing kitchen. Often the answer isn’t a new layout. It’s using the same footprint better: how the cabinets open, what happens in the corners and where the bench gets interrupted. This guide covers practical options within or close to your current layout, and the point where a change starts to involve licensed trades.

Written by Ivan Bodnar, Independent Home Renovation Specialist

Check 01 — Base cabinets

Drawers or doors

A base cabinet with a door and one shelf holds plenty in theory, but in practice the back half becomes a place where things are forgotten. Deep drawers bring the whole depth of the cabinet out to you, so pots, containers and crockery can be seen and reached without kneeling down.

Doors still make sense in places. Under the sink, the trap and pipes get in the way of a full drawer. Some tall or awkward items also sit better on a shelf. Converting some existing carcasses to drawers can work if the carcasses are sound, square and dry. That’s something to check on site, not assume.

What to look at

Swollen or soft carcass panels, especially near the sink

Whether the cabinets are level and square enough for runners

What you actually store, and how often you reach for it

02

Check 02 — Corners

The corners hold more than you're using

Blind corner cabinets in L- and U-shaped kitchens are usually the least used storage in the room. There are three practical routes. You can fit a corner fitting that brings the contents forward. You can reconfigure the corner so the cabinets either side become wider drawer units. Or you can accept the corner as low-use storage and gain the space elsewhere.

Which one suits depends on the corner’s dimensions, how the doors and drawers next to it clear each other, and whether a sink or dishwasher sits nearby. A tape measure and an honest look at the existing carcasses usually settle it. More on this in Layout, Cabinetry and Practical Options.

Clearance is the detail people tend to miss. Two drawers meeting at a corner can block each other, or knock into a handle or an appliance door.

A small vintage kitchen with green cabinets, wood-panelled walls, a central window, and an older freestanding stove.

Reference photo: in a small kitchen like this, look at how short the usable bench run is between the stove and the sink once appliances and cabinet ends take their share.

Check 03 — Bench run

Find the bench you already have

A bench can feel short when it’s really just broken up. The useful stretch is usually the clear run between the sink and the cooktop. Countertop appliances, a microwave at bench height or a poorly placed tall cabinet can each cut it in half.

Practical options include moving appliances into a dedicated tall unit or appliance cupboard, extending the benchtop over an end panel or a short run of new base cabinets, and replacing a worn top with one that continues across a gap. If the existing cabinets are worth keeping, a new benchtop on top of them can be an option. Read Worn Benchtops and Cabinets: Repair, Reuse or Replace before you decide.

Check 04 — Services

Moving the sink, cooktop or a power point changes the job

Most storage and bench improvements can stay within the existing service positions. Once a plan relocates the sink, dishwasher, cooktop, rangehood or power points, plumbing and electrical work comes into it. That work is done by appropriately authorised specialists. I’m an independent sole trader and don’t carry it out myself.

That doesn’t rule those changes out. It means they’re identified at the assessment and organised with the right licensed trades, and they shape the scope. See Licensed Trades for Plumbing and Electrical.

Before the assessment

Note what frustrates you, not just what you want

Which cupboard do you avoid opening?

Where do things end up stacked on the bench?

Which appliances stay out all the time?

Would you be happy keeping the sink and cooktop where they are?

Those answers give the on-site assessment something concrete to work from. The free assessment looks at your cabinets, surfaces and services, and a written quotation follows. An inspection can’t reveal every concealed issue, so the scope is confirmed once the condition is known. Further reading: How to Prepare for an On-Site Kitchen Assessment and Kitchen Renovation in Malvern.