Home / Kitchen Renovation Guides / Sale or Rental
When you’re getting a residential property ready for sale or for tenants, it’s easy to want to replace everything you can see. A sensible scope usually starts in a different place: what’s actually failing, what’s just tired, and what the new finishes would be sitting on. I’m Ivan Bodnar, an independent home renovation specialist. These are the questions I work through with owners before a kitchen renovation in Malvern.
Written by Ivan Bodnar, Independent Home Renovation Specialist
Reference photo: a kitchen where the surfaces have deteriorated. Peeling, damp-affected walls and ceilings are failing and need their cause found before anything new goes on. Old timber cabinets that are worn but still sound may only be tired. Telling the two apart is the first step in setting a scope.
01What is failing. Doors that won’t close, swollen panels near the sink, lifting laminate edges, loose hinges or drawer runners.
02What is only tired. Worn finishes on carcasses that are still sound may only need repair, new doors or a refresh rather than replacement.
03Under the sink. Check the base cabinet and surrounding floor for moisture and damage to the substrate.
04Floor and walls. Uneven floors, cracked plaster and loose splashback tiles affect what can go back on top.
05Services. Moving a sink, cooktop or power point involves licensed trades, which changes the scope.
When you’re preparing for a sale or a rental, the useful question isn’t what the most you could change is. It’s which practical options will leave you with a kitchen that works properly and holds up.
Often they can, if the carcasses are square, dry and firmly fixed. New doors, hardware and adjusted hinges can make a real difference. If a carcass has swollen from moisture, I’d recommend replacing it rather than covering it. There’s more detail in Worn Benchtops and Cabinets: Repair, Reuse or Replace.
A new benchtop is only as good as the cabinets underneath it. If they’re level and sound, replacing just the benchtop can be a sensible update. If they aren’t, it’s worth sorting that out first. See Layout, Cabinetry and Practical Options.
Cracked or loose tiles usually point to the wall behind them. Once the old splashback comes off, the plaster or board needs checking before anything new goes up. Read Replacing a Kitchen Splashback: What to Consider.
FIELD 03 — SURFACES
When you’re working to a deadline, it’s tempting to put fresh finishes over what’s already there. But replacing visible finishes before checking moisture, substrate suitability, service access and underlying damage can lead to avoidable rework, and the next owner or tenant ends up dealing with it. The right scope depends on what the inspection shows.
Read more in Surface Preparation and Hidden Conditions and What May Be Found Behind Kitchen Cabinets.
A rental kitchen in particular has to cope with daily use by people who didn’t choose it. When I’m working out suitable materials, I look at a few things: surfaces that are easy to clean, edges that resist chipping and moisture, and hardware that can be adjusted or replaced without disturbing the rest of the cabinetry. The joints around the sink and cooktop need careful sealing.
Most of the related work often sits inside the same job, such as tiling and kitchen splashbacks, flooring, plasterboard installation and plastering and painting. In every case, it comes back to surface preparation done before the finish goes on.
Reference photo: finishing compound going onto a wall. The surface needs to be sound and flat before a new splashback or paint goes on.
FIELD 05 — SERVICES
I’m an independent sole trader. I don’t personally claim unverified trade licences or builder registration. Licensed plumbing and electrical work is carried out by appropriately authorised specialists. If your update involves moving or adding services, those trades will be part of the plan from the start.
An inspection can’t reveal every concealed issue. Project scope, permits, registration, insurance and licensed trade requirements vary from job to job. Contract, insurance and approvals wording needs project-specific verification. See Terms of Use and Important Information.
If you’re setting a scope for a property in Malvern, the first step is a free on-site kitchen assessment. A free written quotation follows, based on what the assessment finds. To get the most out of the visit, see How to Prepare for an On-Site Kitchen Assessment. You might also find More Storage and Bench Space Without Starting Over useful.